Product Recognition
Certification Number	ZC14-24110479
Name	A19 LED Bulb
Short Description	JascoPro Z-Wave Plus® A19 60W Equivalent LED Bulb, 2700K, 800S
Long Description	Set the scene with the JascoPro Z-Wave Plus® Smart LED Bulb. When paired with a compatible hub, the smart bulb supports ON/OFF, dimming capabilities, programmed settings, and OTA updates. Wirelessly control lamps, sconces, ceiling lights and other fixtures that use standard A19 bulbs for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, SmartThings, Hubitat, Vivint, HomeSeer, Honeywell, Fibaro, Trane, ADT, Vera, eZLO, Home Assistant, and more!
Brand	JascoPro
Product Identifier	76609/ZWT7106
Product Line	Smart Light Bulbs
OEM Version	HW: 01 FW: 08.11:02.01
Hardware Platform	ZGM230SA
Z-Wave Version	7.18.2
Library Type	END_NODE_ENHANCED_232
Device Type	Multilevel Switch DT
Role Type	ROLE_TYPE_END_NODE_ALWAYS_ON
Manufacturer ID	0x0063
Product Type ID	0x4C42
Product ID	0x3037
User Icon	0x0600
Installer Icon	0x0600
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Lighting Devices, Dimming Lighting Devices, Lighting Accessories
Countries / Regions	United States of America
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 Association Group Information (AGI) V3 0x59 3 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 Firmware Update Meta Data V5 0x7A 5 COMMAND_CLASS_INDICATOR_V3 Indicator V3 0x87 3 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi Channel Association V3 0x8E 3 COMMAND_CLASS_VERSION_V3 Version V3 0x86 3 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_SECURITY_2 Security 2 0x9F 1 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_SWITCH_MULTILEVEL_V4 Multilevel Switch V4 0x26 4 COMMAND_CLASS_BASIC_V2 Basic V2 0x20 2 COMMAND_CLASS_CONFIGURATION_V4 Configuration V4 0x70 4 COMMAND_CLASS_APPLICATION_STATUS Application Status 0x22 1
S2 Classes	S2_AUTHENTICATED, S2_UNAUTHENTICATED
Documents	Category File Manual_English 76609QSGv2OL.pdf Adv_Manual 76609spec.docx
Features	Feature Values Firmware Updatable Value Updatable by Consumer by RF
Association Groups	Group Number Maximum Nodes Supported End Point ID Group Name Profile 1 5 0 Lifeline 0x0001
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value 1 Dim Level Dim level when light bulb is turned ON 0 1 0 0 0x00 6 Enable/Disable Ramping when power is restored to bulb Enable/Disable Ramping when power is restored to bulb. 0 (default): do not ramp, turn instantly to appropriate level when power is restored. 1: perform dimming ramping behavior to appropriate level when power is restored 0 1 0 0 0x00
Texts	ID Description Value 8 Where to find S2 DSK on product Under the 'Z-Wave SmartStart Inclusion' subheading under the 'Adding Your Device To a Z-Wave Network' section 1 Classic Inclusion To change to classic inclusion mode, turn bulb OFF, then ON three times. The bulb rapidly flashes four times to indicate classic mode. 2 Classic Exclusion Once the controller is ready to remove your device, turn bulb OFF, then ON three times. The smart bulb flashes twice when removed from the network. 5 Factory Reset Procedure Turn the switch off, pause one second, then turn back ON. Repeat three times (four times total). The smart bulb flashes twice when reset.
Supports NWI	Yes
Supports Explorer Frames	Yes
Supports SmartStart	Yes