Product Recognition
Certification Number	ZC10-15120015
Name	AXON™ Home Router
Short Description	The GWS-HR-001 Home Router enables AXON™ smart services such as home automation, smart energy and home security.
Long Description	The AXON™ Home Router is a full-featured Ethernet router and WiFi Access Point. The router provides a connection to a WAN port for connecting Broadband connection such as through a Cable or DSL modem and provides home automation control through the use of Z-Wave networking technology. The Z-Wave network allows devices from multiple manufacturers to be connected to your Broadband Home Router’s internal Z-Wave Plus Controller.
Brand	GreenWave Systems
Product Identifier	GWS-HR-001
OEM Version	01
Hardware Platform	SD3502
Z-Wave Version	6.51.06
Library Type	CONTROLLER_BRIDGE
Device Type	Central Controller
Role Type	ROLE_TYPE_CONTROLLER_CENTRAL_STATIC
Manufacturer ID	0x0099
Product Type ID	0x0001
Product ID	0xA001
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Controllers, Gateway Controller
Countries / Regions	United States of America
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_ASSOCIATION Association 0x85 1 COMMAND_CLASS_SWITCH_MULTILEVEL Switch Multilevel 0x26 1 COMMAND_CLASS_ASSOCIATION_GROUP_INFORMATION Association Group Information V1 0x59 0 COMMAND_CLASS_DOOR_LOCK Door Lock 0x62 1 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION Multi-Channel Association V1 0x8E 0 COMMAND_CLASS_MULTI_CHANNEL Multi-Channel V1 0x60 0 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_WAKE_UP Wake Up 0x84 1 COMMAND_CLASS_THERMOSTAT_MODE Thermostat Mode 0x40 1 COMMAND_CLASS_SENSOR_MULTILEVEL Sensor Multilevel 0x31 1 COMMAND_CLASS_SWITCH_BINARY Switch Binary 0x25 1 COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_CRC_16_ENCAP CRC16 Encapsulation 0x56 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_THERMOSTAT_SETPOINT Thermostat Setpoint 0x43 1 COMMAND_CLASS_METER Meter 0x32 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC Manufacturer Specific 0x72 1 COMMAND_CLASS_VERSION Version 0x86 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Final INS11796-4-UserGuide - 2015-12-28.docx
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 255 0 Z-Wave Plus Lifeline
Texts	ID Description Value 23 Controller Inclusion Adding devices to your Z-Wave network is referred to as Inclusion. To add a device, start by pressing on the “Add Devices” button at the bottom of the SDK Application’s Devices Screen. Once this is pressed, the inclusion process is initiated and you have 60 seconds to complete the process. Before the timeout occurs, you need to perform an action on the device that you would like to add to the Z-Wave network. Many devices have a similar process for being included (such as pressing a button on the device), but you should follow the instructions provided with the device you are trying to include into the Z-Wave network. 24 Controller Exclusion Removing devices from your Z-Wave network is also referred to as exclusion and works in a similar way to adding devices. You start the remove process by pressing on the “Remove Devices” button at the bottom of the SDK Application’s Devices screen. Once this is pressed, the removal process is initiated and you have 60 seconds to complete the process. Before the timeout occurs, you need to perform an action on the device you would like to remove from the Z-Wave network. Many devices have a similar process for being removed (such as pressing a button on the device), but you should follow the instructions provided with the device you are trying to remove. 3 Learn Mode (adding another controller) To start this process, start the Include function on the pre-existing Z-Wave controller. Secondly, put the Axon™ Home Router into Learn Mode. To put the controller into Learn mode, select the Controller from the Devices Screen to bring up the details of the Controller. From the Controller details screen, you will see the option to select the “Put this Controller in Learn Mode” command button. 5 Factory Reset A Reboot/Reset button is located on the backside of the AXON™ Home Router. It can easily be identified on the back of the unit by its red color and location directly above the yellow RJ45 Ethernet ports and below the USB ports. Pressing the button will perform one of two functions depending on how long the button is pressed. A short press will trigger a reboot of the router and will not change any permanent settings. A long press (3 second and longer) will trigger a reset operation and then will reboot the AXON™ Home Router. A reset operation will change all router settings including the Z-Wave Controller settings back to its factory default.
Supports NWI	Yes
Supports Explorer Frames	Yes