Z-Wave Products
There are thousands of interoperable
Products
Click on a product to see details.
Brand:
QEES ApS
Product:
313-A(KFBGLW)(WB)-A1
Device Version:
1
Territory:
CEPT (Europe)
Description:
Software Updateable Binary Switch with Power MeterQEES RETO Plug-in Switch Plus brings along comfort and elegance with an extremely easy setup and a unique design. With its help you can now wirelessly turn on/off most of the electrical equipment inside your home.<BR/><BR/><BR/>QEES RETO Plug-in Swit
Enlarge
Brand:
QEES ApS
Product:
311-AQ(WB)-A1
Device Version:
1
Territory:
CEPT (Europe)
Description:
QEES RETO Shell Switch Plus is a highly aesthetic Z-Wave-controlled 13A switch (EU frequency) designed to control a lamp or any other load type.<BR/> <BR/>QEES RETO Shell Switch Plus is a wirelessly controlled switch for retrofit installation that can also be operated locally by pushing the top cove
Enlarge
Brand:
Think Simple srl
Product:
01E010020
Device Version:
NWE010/SL v1.0
Territory:
CEPT (Europe)
Description:
1 channel Switch - 503 BOX - ZWavene button Smart Glass Switch <BR/>Switch Device for Modbus System<BR/>with one switche for lighting control <BR/>or alternatively, sequential <BR/>pre-programmed settings<BR/>Configurable aural feedback<BR/><BR/>Available in British Standard & European Standard;<BR/
Enlarge
Brand:
Chromagic
Product:
HAN01
Territory:
CEPT (Europe)
Description:
Z-Wave In Wall Switch (EU) 300 Series HAN01Easy install<BR/>Option external antenna to extend the RF range<BR/>Zero crossing technology to protect and extend the life of the relay<BR/>Very low no load power consumption , meet Europe year 2012 energy-related products requirement directive 2009/12
Enlarge
Brand:
Chromagic
Product:
HAN02-1
Device Version:
HAN02-1 v1.0
Territory:
CEPT (Europe)
Description:
The in wall switch is a plug-in routing slave device, to receive the command from the controller. The controller can controls the ON/OFF status of the plug-in lighting fixtures, which power loading should not over 1000W.
Enlarge
Brand:
Remotec
Product:
ZRM-80SA
Territory:
CEPT (Europe)
Description:
ZRW-80US Z-Wave Wall Switch
Enlarge
Brand:
Z-Wave.Me
Product:
ZME_06431
Device Version:
v1.3
Territory:
CEPT (Europe)
Description:
This Z-Wave.Me switching Flush-Mountable is intended to control all kinds of electrical loads. A 230V powered pattress box is needed for installation. The Flush-Mountable has two buttons. In order to use them for local control the Flush-Mountable needs to be completed with a switching paddle and a m
Enlarge
Brand:
GreenWave Systems
Product:
NS310-F / NS312-F
Territory:
CEPT (Europe)
Description:
The single port version of the PowerNode, these devices communicate wirelessly to the Gateway, allowing for energy monitoring and device control. Our products come pre-configured to connect to the Gateway with minimal consumer set-up.
Enlarge
Brand:
GreenWave Systems
Product:
NP310-F / NP312-F
Territory:
CEPT (Europe)
Description:
The PowerNode 6-Port allows users to connect up to 6 appliances, making them smart, energy conscious and controllable. Our patent-pending DeviceDNA technology instantly recognizes the device upon being plugged into the PowerNode, to facilitate identification of your devices.
Enlarge
Brand:
Danfoss
Product:
014G0272
Device Version:
1.0
Territory:
CEPT (Europe)
Description:
A Wireless Relay for controlling the Heat Demand Signal to one Boiler.The Danfoss Link™ BR (Boiler Relay) is a device for turning gas and oil boilers ON/OFF depending on heating demand .
Enlarge
Brand:
FIBARO
Product:
FGS211
Device Version:
v1.4-v.1.7
Territory:
CEPT (Europe)
Description:
The In-Wall Relay Switch is hereinafter referred to as Fibaro Switch. It is designed to switch on/off devices connected to its terminals using radio waves, controllers and push button directly connected to the Fibaro Switch.<BR/><BR/>The remotely controlled Relay Switch of Fibaro system is designed
Enlarge
Brand:
TKB Home
Product:
TZ68G
Device Version:
TZ68 v3.0
Territory:
CEPT (Europe)
Description:
This plug-in ON/OFF Module in a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer's Z-Wave en
Enlarge