Z-Wave Products
There are over 4003 interoperable
Products
Click on a product to see details.
New product!
Version 2
Brand:
WiDom
Product:
DRYZRX
Device Version:
HW: 01 FW: 07.00
Territory:
CEPT (Europe)
Description:
Smart Dry Contact Switch 7 can turn ON and OFF equipment’s with an independent power supply, such as solenoid valves (e.g. gas, water and irrigation), power operated valves etc.
<BR/>In its ZRX variant the device can also be controlled by Cherubini Remote Controls of SKIPPER - POP OR GIRO series.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Version 2
Z-Wave Plus Version 2
Products that are Z-Wave Plus Version 2 Certified 'Raise the Bar' on Interoperability Again.Z-Wave Plus Version 2 products include Security 2 (S2) and SmartStart by default, increased range and battery life (700 Series) along with additional requirements for gateways and hubs to provide you with even more Z-Wave product interoperability options!
Enlarge
New product!
Version 2
Brand:
Cherubini
Product:
A510082
Device Version:
HW: 01 FW: 07.00
Territory:
CEPT (Europe)
Description:
META Dry Contact Switch 7 can turn ON and OFF equipment’s with an independent power supply, such as solenoid valves (e.g. gas, water and irrigation), power operated valves etc.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Version 2
Z-Wave Plus Version 2
Products that are Z-Wave Plus Version 2 Certified 'Raise the Bar' on Interoperability Again.Z-Wave Plus Version 2 products include Security 2 (S2) and SmartStart by default, increased range and battery life (700 Series) along with additional requirements for gateways and hubs to provide you with even more Z-Wave product interoperability options!
Enlarge
New product!
Brand:
Nice
Product:
FGPB-101
Device Version:
HW: 1 FW: 3.02
Territory:
CEPT (Europe)
Description:
Push-Control is a compact, battery-powered, Z-Wave Plus™ compatible device. It allows you to control devices through the Z-Wave™ network and run various scenes defined in Yubii smart home system.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Enlarge
New product!
Brand:
Nice
Product:
FGS-223
Device Version:
HW: 3 FW: 3.04
Territory:
CEPT (Europe)
Description:
On/Off-Control is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Enlarge
New product!
Brand:
Nice
Product:
FGWPx-102
Device Version:
HW: 2 FW: 3.02:03.02
Territory:
CEPT (Europe)
Description:
Plug-Control is a universal, Z-Wave Plus™ compatible, remotely controlled outlet adapter. This device may be applied wherever you want to control electrical devices with up to 2500W load.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Enlarge
New product!
S2 Security
Enabled
Brand:
Nice
Product:
FGBS-222
Device Version:
HW: 2 FW: 5.02
Territory:
CEPT (Europe)
Description:
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave™ network communication.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
S2 Security
- Z-Wave devices with S2 Security have a new layer of security – an addition on top of an already secure network – to give you virtually impenetrable protection for your smart home devices.
- S2 was developed by cyber experts who study hacking and intrusion techniques. Designed from the ground up, S2 includes best-in-class tools to stop anyone from getting access to your smart home network.
Security 2 (S2)
Safer, Smarter… Z-Wave.Enabled
- Z-Wave SmartStart technology greatly simplifies installations..
- Device recognition and inclusion is automatic through a SmartStart gateway, using a QR code scan scan for efficient and consistent installation. There are no complicated inclusion sequences or keystroke combinations. Simply mount the devices and provide them with power and they are ready to use.
- Thanks to Z-Wave interoperability, SmartStart setups are uniform across all device types and brands, and because they’re built over Z-Wave’s industry-leading S2 security framework, SmartStart installations are not only easy, they’re secure.
SmartStart
Enlarge
New product!
Enabled
Brand:
Nice
Product:
FGRGBW-442
Device Version:
HW: 2 FW: 5.00:05.00:01.00
Territory:
CEPT (Europe)
Description:
RGBW-Control is a universal, Z-Wave Plus™ compatible RGB/RGBW controller.
The device uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Enabled
- Z-Wave SmartStart technology greatly simplifies installations..
- Device recognition and inclusion is automatic through a SmartStart gateway, using a QR code scan scan for efficient and consistent installation. There are no complicated inclusion sequences or keystroke combinations. Simply mount the devices and provide them with power and they are ready to use.
- Thanks to Z-Wave interoperability, SmartStart setups are uniform across all device types and brands, and because they’re built over Z-Wave’s industry-leading S2 security framework, SmartStart installations are not only easy, they’re secure.
SmartStart
Enlarge
New product!
Version 2
Brand:
WiDom
Product:
DRY700
Device Version:
HW: 01 FW: 07.00
Territory:
CEPT (Europe)
Description:
Smart Dry Contact Switch 7 can turn ON and OFF equipment’s with an independent power supply, such as solenoid valves (e.g. gas, water and irrigation), power operated valves etc.
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Version 2
Z-Wave Plus Version 2
Products that are Z-Wave Plus Version 2 Certified 'Raise the Bar' on Interoperability Again.Z-Wave Plus Version 2 products include Security 2 (S2) and SmartStart by default, increased range and battery life (700 Series) along with additional requirements for gateways and hubs to provide you with even more Z-Wave product interoperability options!
Enlarge
Brand:
Nice
Product:
FGD-212
Device Version:
HW: 2 FW: 3.05:03.05
Territory:
CEPT (Europe)
Description:
Module is designed to work with various types of light sources. It may be connected to two-wire or three wire configuration so it can operate with or without neutral lead
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Enlarge
Brand:
Philio
Product:
PAD19-EU
Device Version:
HW: 01 FW: 01.03:01.02
Territory:
CEPT (Europe)
Description:
PAD19 is a 2/3 Wire dimmer.
<BR/>It can only needs to connect two wires, single wire (L) and load (NO1),or three wires, two wire (L、N) and load (NO1)
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Version 2
Z-Wave Plus Version 2
Products that are Z-Wave Plus Version 2 Certified 'Raise the Bar' on Interoperability Again.Z-Wave Plus Version 2 products include Security 2 (S2) and SmartStart by default, increased range and battery life (700 Series) along with additional requirements for gateways and hubs to provide you with even more Z-Wave product interoperability options!
Enlarge
Brand:
Everspring
Product:
AD370-0
Device Version:
HW: 01 FW: 01.01:00.03
Territory:
CEPT (Europe)
Description:
AD370 is an inwall dimmer module to dim lighting appliances by Z-WaveTM wireless control. It uses MOS technology to achieve both Trailing-edge dimming for LED lighting and Leading-edge dimming for older lamps. Compact in design, yet certified for safety makes it suitable for installation in crammed ...
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
Version 2
Z-Wave Plus Version 2
Products that are Z-Wave Plus Version 2 Certified 'Raise the Bar' on Interoperability Again.Z-Wave Plus Version 2 products include Security 2 (S2) and SmartStart by default, increased range and battery life (700 Series) along with additional requirements for gateways and hubs to provide you with even more Z-Wave product interoperability options!
Enlarge
Brand:
Sunricher
Product:
SR-ZV9021A-EU
Device Version:
HW: 1 FW: 2.05
Territory:
CEPT (Europe)
Description:
The Z-Wave™ Smart Plug is a Z-Wave™ device that is used to power connected lighting using Z-Wave Plus™ and
can be controlled by other Z-Wave devices. The device supports metering function (voltage, current, energy
consumption and power), it also supports thermostat’s Heat Mode, Energy Heat Mo...
- Z-Wave Plus® is the latest certification standard providing a higher level of requirements than all previous certificaton programs.
- Required for all products that use the Z-Wave 500 Series modules or later, Z-Wave Plus® Certification provides the highest level of device interoperability.
- 500 Series and Z-Wave Plus® Certification Features:
- Better device range
- 50% longer battery life
- Improved product documentation requirements to provide consumers with more information
Z-Wave Plus®
S2 Security
- Z-Wave devices with S2 Security have a new layer of security – an addition on top of an already secure network – to give you virtually impenetrable protection for your smart home devices.
- S2 was developed by cyber experts who study hacking and intrusion techniques. Designed from the ground up, S2 includes best-in-class tools to stop anyone from getting access to your smart home network.
Security 2 (S2)
Safer, Smarter… Z-Wave.
Enlarge