COMMAND_CLASS_ASSOCIATION

Association

0x85

1

COMMAND_CLASS_SWITCH_MULTILEVEL

Switch Multilevel

0x26

1

COMMAND_CLASS_ASSOCIATION_GROUP_INFORMATION

Association Group Information V1

0x59

0

COMMAND_CLASS_DOOR_LOCK

Door Lock

0x62

1

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION

Multi-Channel Association V1

0x8E

0

COMMAND_CLASS_MULTI_CHANNEL

Multi-Channel V1

0x60

0

COMMAND_CLASS_BATTERY

Battery

0x80

1

COMMAND_CLASS_WAKE_UP

Wake Up

0x84

1

COMMAND_CLASS_THERMOSTAT_MODE

Thermostat Mode

0x40

1

COMMAND_CLASS_SENSOR_MULTILEVEL

Sensor Multilevel

0x31

1

COMMAND_CLASS_SWITCH_BINARY

Switch Binary

0x25

1

COMMAND_CLASS_BASIC

Basic

0x20

1

COMMAND_CLASS_CRC_16_ENCAP

CRC16 Encapsulation

0x56

1

COMMAND_CLASS_SECURITY

Security S0

0x98

1

COMMAND_CLASS_THERMOSTAT_SETPOINT

Thermostat Setpoint

0x43

1

COMMAND_CLASS_METER

Meter

0x32

1

COMMAND_CLASS_MANUFACTURER_SPECIFIC

Manufacturer Specific

0x72

1

COMMAND_CLASS_VERSION

Version

0x86

1

Manual_Primary_Lang

Product or Owner's Manual

1

255

0

Z-Wave Plus Lifeline

23

Controller Inclusion

Adding devices to your Z-Wave network is referred to as Inclusion. To add a device, start by pressing on the “Add Devices” button at the bottom of the SDK Application’s Devices Screen. Once this is pressed, the inclusion process is initiated and you have 60 seconds to complete the process. Before the timeout occurs, you need to perform an action on the device that you would like to add to the Z-Wave network. Many devices have a similar process for being included (such as pressing a button on the device), but you should follow the instructions provided with the device you are trying to include into the Z-Wave network.

24

Controller Exclusion

Removing devices from your Z-Wave network is also referred to as exclusion and works in a similar way to adding devices. You start the remove process by pressing on the “Remove Devices” button at the bottom of the SDK Application’s Devices screen. Once this is pressed, the removal process is initiated and you have 60 seconds to complete the process. Before the timeout occurs, you need to perform an action on the device you would like to remove from the Z-Wave network. Many devices have a similar process for being removed (such as pressing a button on the device), but you should follow the instructions provided with the device you are trying to remove.

3

Learn Mode (adding another controller)

To start this process, start the Include function on the pre-existing Z-Wave controller. Secondly, put the Axon™ Home Router into Learn Mode. To put the controller into Learn mode, select the Controller from the Devices Screen to bring up the details of the Controller. From the Controller details screen, you will see the option to select the “Put this Controller in Learn Mode” command button.

5

Factory Reset

A Reboot/Reset button is located on the backside of the AXON™ Home Router. It can easily be identified on the back of the unit by its red color and location directly above the yellow RJ45 Ethernet ports and below the USB ports. Pressing the button will perform one of two functions depending on how long the button is pressed. A short press will trigger a reboot of the router and will not change any permanent settings. A long press (3 second and longer) will trigger a reset operation and then will reboot the AXON™ Home Router. A reset operation will change all router settings including the Z-Wave Controller settings back to its factory default.