| Product Recognition | |
|---|
| Certification Number | ZC10-16035021 |
|---|
| Name | IoT DoorCam |
|---|
| Short Description | Remotely check my home's visitors |
|---|
| Long Description | LG Uplus IoT DoorCam streams live video feed to your phone remotely. The app receives push notifications of different activities and record motion videos when visitors arrive. It also checks the battery life with the app and receives reminders when the battery is low. |
|---|
| Brand | LG Uplus |
|---|
| Product Identifier | DCH-01 |
|---|
| OEM Version | HW: 1 FW: 39.25 |
|---|
| Hardware Platform | ZM5101 |
|---|
| Z-Wave Version | 6.51.06 |
|---|
| Library Type | SLAVE_ENHANCED_232 |
|---|
| Device Type | On/Off Power Switch |
|---|
| Role Type | ROLE_TYPE_OTHER |
|---|
| Manufacturer ID | 0x023D |
|---|
| Product Type ID | 0x0043 |
|---|
| Product ID | 0x0001 |
|---|
| User Icon | 0x0700 |
|---|
| Installer Icon | 0x0700 |
|---|
| Frequency Plans | KR: 920.90MHz, 921.70MHz, 923.10MHz |
|---|
| Categories | Hospitality |
|---|
| Countries / Regions | Republic of Korea |
|---|
| Documents | |
|---|
| Association Groups | | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
| 1 | 5 | 0 | This product's Association Group are used by Life Line of products. |
|
|---|
| Texts | | ID | Description | Value |
|---|
| 1 | Inclusion | This must be done when DoorCam is exclusion status (Z-Wave LED remained on).
After doing inclusion action on Controller, please do the followings.
a. Press & hold ‘Z-Wave’ button for 5 seconds when DoorCam is exclusion status.
b. When Z-Wave LED blinks with 250ms interval, release ‘Z-Wave’ button to try inclusion.
c. DoorCam will try inclusion for 30sec.
d. Z-Wave LED will be turned off if inclusion is successful. | | 2 | Exclusion | This must be done when DoorCam is inclusion status (Z-Wave LED remained off).
After doing exclusion action on Controller, please do the followings.
a. Press & hold ‘Z-Wave’ button for 5 seconds when DoorCam is inclusion status.
b. When Z-Wave LED blinks with 250ms interval, Release ‘Z-Wave’ button to try exclusion.
c. DoorCam will try exclusion for 30sec.
d. Z-Wave LED will be turned on if exclusion is successful. | | 5 | Factory Reset | a. Hold the ‘Z-Wave’ button for 10seconds.
(Z-Wave LED will blink after 5 seconds with 250ms interval then Z-Wave LED will be turned off after another 5 seconds.)
b. When Z-Wave LED stops blinking after 10 seconds, release Z-Wave button.
c. When factory reset is successful, LED will be on.
Please use this procedure only if the network primary controller is missing or inoperable. |
|
|---|
| Supports NWI | Yes |
|---|
| Supports Explorer Frames | Yes |
|---|
