Product Recognition
Certification Number	ZC10-15090004
Name	Smoke Detector and Siren
Short Description	EN 14604 certified Smoke Detector with built in Z-Wave controllable siren function
Long Description	This products consists of a standard photo electric Smoke detector with a pluggable Z-Wave wireless interface module. The Smoke detector will also work as a stand alone product and is certified by VDS according to EN 14604. The smoke chamber of the detector has a stainless steel reel with antistatic plastic chamber. A button allows on-device test of smoke chamber, electronics and battery. The device also offers a built-in self test and an electronic smoke chamber test to avoid the use of test aerosol. A low battery warning will last for 30 days but full function of the detector is guaranteed during this time. The Z-Wave module allows to report the smoke and low battery alarm wirelessly to a central controller. The detector can also be used as a wireless siren for alarm system or other applications. The wireless module is operated by the 9V battery of the smoke detector. An optional external power supply allows external powering the unit. According to VdS 3515 (Smoke Detectors with Wireless Communication) this device will send alarm signals to all other smoke detectors registered in association group 2 to turn on their siren. This function ensures that all smoke detectors will issue noise if one of them detected a smoke.
Brand	Z-Wave.Me
Product Identifier	004001
OEM Version	1
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ROUTING
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0115
Product Type ID	0x0100
Product ID	0x0201
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Security Add-Ons
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_NOTIFICATION Notification V1 0x71 0
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual 004001_fixedmanual.docx
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 4 0 Z-Wave Plus Lifeline 2 4 0 Alarm Reports 3 4 0 Switching Commands (Basic on/off) on Alarm
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1 Siren Alarm Sequence Interval The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds. 0 1 0 0 10 From To Description 3 127 seconds 2 Siren Alarm Tone Length The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval. 0 1 0 0 8 From To Description 1 99 seconds 3 Value of On-Command Value of the BASIC SET Command send to Association Group 3 when Alarm happens 0 1 0 0 99 From To 0 99 4 Value of Off-Command Value of the BASIC SET Command send to Association Group 3 when Alarm is reset 0 1 0 0 0 From To 0 99
Texts	ID Description Value 1 Inclusion Hit the little button on the wireless module for 1 second 2 Exclusion Hit the little button on the wireless module for 1 second 5 Factory Reset To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5 seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes