Water Dragon – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC14-22100149

Name

Water Dragon

Short Description

The Alarm.com Smart H2O Monitor is a non-intrusive water leakage detection device for residential and light commercial installation, giving property owners peace of mind.

Long Description

The Alarm.com Smart H2O Monitor is a non-intrusive water leakage detection device for residential and light commercial installation, giving property owners peace of mind. The Smart H2O Monitor supports whole home water leak detection and reporting to provide a comprehensive water solution. The primary use is for indoor-based water systems. Features include: • Warnings for possible pipe freezes • Prevent catastrophic water damage • Whole-home leak detection and notification with a single device • Provide alerts for leaks to prevent mold, water waste, and minor water damage • Provide guidance on water flow rate to inform homeowners • Provide monthly water usage data validation

Brand

Alarm.com

Product Identifier

ADC-SHM-100-A

Product Line

Test

OEM Version

HW: 01 FW: 00.25:00.20

Hardware Platform

ZGM130S037HGN2 / ZGM130S037HGN1

Z-Wave Version

7.16.3

Library Type

END_NODE_ENHANCED_232

Device Type

Notification Sensor DT

Role Type

ROLE_TYPE_SLAVE_ALWAYS_ON

Manufacturer ID

0x0094

Product Type ID

0x0007

Product ID

0x0004

User Icon

0x0C00

Installer Icon

0x0C00

Frequency Plans

US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz

Categories

Sensors, Water Valves & Irrigation

Countries / Regions

United States of America, Canada

Supported Command Classes

S2 Classes

S2_AUTHENTICATED, S2_UNAUTHENTICATED

Documents

Association Groups

Configuration Parameters

Texts

ID	Description	Value
8	Where to find S2 DSK on product	In the box • Smart H2O Monitor (with device DSK label)
1	Classic Inclusion	Adding the Water Dragon to a Z-Wave network For best results, we recommend bringing the Smart H2O Monitor closer to your Z-Wave controller. 1. Put the Z-Wave controller in Add mode. Refer to the controller’s documentation for more information. 2. Press the Network button on the side of the Smart H2O Monitor to begin the Add process. The Network LED on the unit will begin blinking. After the Water Dragon is successfully added to the Z-Wave network, the Network LED on the control unit will turn solid green. If the Network LED is not illuminated after the Add process, repeat steps 1 and 2. SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10 minutes of being on in the network vicinity.
2	Classic Exclusion	Removing the Water Dragon from the Z-Wave network 1. Put the Z-Wave controller in Remove mode. Refer to the controller’s documentation for more information. 2. Press the Network button on the side of the Smart H2O Monitor to begin the Remove process. The Network LED on the control unit will begin blinking. 3. After the Smart H2O Monitor is successfully removed from the network, the Network LED will turn off. If the Network LED is still illuminated after completing the Remove process, repeat steps 1 and 2.
5	Factory Reset Procedure	Resetting the Water Dragon to factory default settings CAUTION: Resetting the Water Dragon to its factory default settings will delete the device from the Z-Wave network and restore all settings to their default values. Press and hold the Network button for 15 seconds. All 3 LEDs will blink until the factory reset is complete. Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Supported / Controlled Meter Types

Supported Notification Types

Supported Multilevel Sensors

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes